tag-line

CPVC PIPES & FITTINGS

“Hot & Cold Water Plumbing Solution for the Next Generation”

Dutron CPVC Hot and Cold Water Plumbing System is an attractive alternative to conventional plumbing system made of G.I. and copper pipes. Dutron Hot and Cold Water Plumbing system uses pipes and fittings made of technically advanced plastic material. Dutron CPVC pipes and fittings are manufactured in sizes ½” to 2” with ISI (IS 15778) mark and 2 ½” to 6” as per ASTM F441.

Pipes are produced out of extrusion process while injection moulded, under international ISO 9001:2015 process standards, with most sophisticated systems for quality assurance.

Composition: Made from Chlorinated Poly Vinyl Chloride (CPVC) – next generation plastic material with unique physical properties desirable for Hot and Cold water applications. Pipes and Fittings of CPVC are rigid and provide good impact resistance.

CPVC Pipes

  • Can withstand high and low temperatures
  • Resistant to many everyday household chemicals
  • Long, maintenance free service life due to corrosion resistance
  • Does not support combustion; therefore they cannot burn without external fuel source
  • Can handle most of the temperature/pressure requirements of today’s typical process plants
  • Easy to install using solvent cement
  • Economical and long lasting
  • Light weight
  • Low friction
  • Complete range of pipes (IS 15778) and fittings (as per ASTM D 2846)
  • CPVC Compounds are sourced from Sekisui Chemical Ltd., Japan. It is certified by NSF International (USA)

PLACE ORDER

Specifications

Nominal Pipe Size Outer Diameter in (mm) SDR 11 SDR 13.5
Wall Thickness in (mm) Working Pressure at Wall Thickness in (mm) Working Pressure at
23°C 82°C 23°C 82°C
inch mm Average Tolerance Minimum Tolerance kg/cm² Minimum Tolerance kg/cm²
½ 15 0.625 (15.90) ±0.003 (±0.08) 0.068 (1.73) ±0.020 (±0.51) 28.1 7.0 0.055 (1.40) ±0.020 (±0.51) 22.5 5.6
¾ 20 0.875 (22.20) ±0.003 (±0.08) 0.080 (2.03) ±0.020 (±0.51) 28.1 7.0 0.065 1.65 ±0.020 (±0.51) 22.5 5.6
1 25 1.125 (28.60) ±0.003 (±0.08) 0.102 (2.59) ±0.020 (±0.51) 28.1 7.0 0.083 (2.12) ±0.020 (±0.51) 22.5 5.6
32 1.375 (34.90) ±0.003 (±0.08) 0.125 (3.18) ±0.020 (±0.51) 28.1 7.0 0.102 (2.59) ±0.020 (±0.51) 22.5 5.6
40 1.625 (41.30) ±0.004 (±0.010) 0.148 (3.76) ±0.020 (±0.51) 28.1 7.0 0.120 (3.06) ±0.020 (±0.51) 22.5 5.6
2 50 2.125 (54) ±0.004 (±0.010) 0.193 (4.90) ±0.023 (±0.58) 28.1 7.0 0.157 (4.00) ±0.023 (±0.58) 22.5 5.6
Size mm (inch) Outer Diameter in (mm) Schedule 40 Wall Thickness in (mm) Schedule 80 Wall Thickness in (mm)
65 (2.1/2”) 73.0 ± 0.18 (72.82 – 73.18) 5.16 – 5.77 7.01 – 7.85
80 (3”) 88.9 ± 0.20 (88.7 – 89.1) 5.49 – 6.15 7.62 – 8.53
100 (4”) 114.3 ± 0.23 (114.07 – 114.53) 6.02 – 6.73 8.56 – 9.58
150 (6”) 168.3 ± 0.28 (168.02 – 168.58) 7.11 – 7.97 10.97 – 12.29

CPVC Fittings

Dutron CPVC Fittings provide an attractive alternative to G.I. and copper fittings used in conventional plumbing systems. These pipes and fittings are produced from a specialty blend of Chlorinated Poly Vinyle Chloride (CPVC) material with unique properties desirable for Hot and Cold water applications.

  • All fittings as per SDR 11
  • Complete range of fittings in accordance with ASTM D-2846
PLACE ORDER

Coupler

Trans. Bush

Tank Adaptor

Elbow 90°

End Cap

Tank Connector

Tee

Union

Reducer

Elbow 45°

Ball Valve

R.M.T.A.

Cross Tee

Flo Ball Valve

R.F.T.A.

F.T.A.

End Plug

Fabricated Bend – SDR 11

M.T.A.

Step Over Bend

Reducer Bush

Reducing Tee

M.I. Elbow

M.I. Tee

M.I. F.T.A.

M.I. M.T.A.

M.I. Reducer Tee

M.I. Reducer Elbow

M.I. Reducer M.T.A.

M.I. Reducer F.T.A.

M.I. Elbow Fix

M.I. Reducer Elbow Fix

Metal Clamp-CTS

CPVC Solution

NETWORK

Find your nearest Dealers